How To Install Pulley Clothes Celling Roof Dryer Hanger

Fit the rope clamp on the wall at a height that is comfortable.

Fit the first hoister on the ceiling...

Fit the screw on the ceiling by passing it through the holes on the hoisters using fasteners.

Make sure the distance between both the hoisters is equal to the length of the pipes provided.

Repeat the same procedure used for the fitting of the 1st hoister.

Do not cut the rope. Straighten the rope & pass both ends through the wheel of the 1st hoister.

Pull 1 end of the rope below.

{DO NOT PASS THE ROPE THROUGH THE PIPE.}

Pass the other end through the wheel of the 2nd hoister.

Position of the ropes after passing through the hoisters.

Loose ends of the rope

Pass 1 loose end of the rope through the cap with a hole on the side and knot the rope.

Pull the double rope and level the pipe such that its both ends touch the hoisters.

Pass the double rope through the white cap using the metal string provided.

After passing the double rope, knot it at a level such that when the cap is tucked into the rope clamp, both ends of the pipe touch the heister.

Repeat the process for all pipes and ropes.

Optional:

Fix the 2nd cap at the lower end of the rope. Now you can tuck the cap in the clamp and enable

the pipe to stay lowered at a level convenient to you.

Ceiling Cloth Dryer Kukatpally